Daily Maintenance And Care Methods For High Platform Ball Valves
Daily maintenance and care methods for Sanitary Ball Valve
Daily maintenance and care methods for high platform ball valves. High platform ball valves are mainly used to cut off and change the flow direction of the medium in daily life. The ball valve switch is small and convenient. The performance of all aspects has been tested. Finally, it has won the trust of customers and has been widely used in various industries. The more it is used, the faster it will be consumed. Of course, daily maintenance must also keep up, otherwise it will reduce work efficiency, increase maintenance time, and increase costs. If you want the high platform ball valve to run for a long time, how should you perform daily maintenance?
Pay attention to the storage place. It cannot be stored in the open air for a long time. This will cause the valve to rust and cannot work normally. The storage environment should be rainproof, waterproof, and moisture-proof. If the valve is stored for a long time, you should also pay attention to regularly taking it out to check its condition. Before using the high platform ball valve, pay attention to whether there are impurities and other foreign matter in the pipe. If there are, you must clean it with all your strength. If you find a slight leak at the packing during use, you can tighten the stem nut slightly until the leak stops, and you don’t need to continue tightening. After using the high platform ball valve, it should be cleaned. The cleaning agent used should not react chemically with it. After cleaning, wipe it dry and store it.
Rotate the high platform ball valve 90 degrees to close it tightly, which is the most equal resistance. The medium is considered to be used directly through a very small flow, and the stainless steel ball valve is designed to control its flow. When choosing a stainless steel ball valve, the whole is also a combination form.
Usually suitable for water, solvents and acid natural gas, etc., through the general medium and the applicable working condition medium through hydrogen peroxide design, the overall combination form, the working principle is smooth and light, and the small size and can be made into a large diameter seal are more reliable, and the high platform ball valve structure is also relatively simple. It can be eroded by the medium under normal conditions and is widely used in all walks of life.
The above is the daily maintenance of the high platform ball valve. Doing these points ensures that the high platform ball valve can be used for a long time.
