Detailed Explanation Of Installation Problems Of Sanitary Manual Butterfly Valve

Sanitary Butterfly Valve When installing, you need to pay attention to the following issues:

The sanitary butterfly valve is installed upright and vertically on the pipeline. A support frame should be added in places where the valve has a large deadweight or there is vibration. The valve body should avoid excessive stress due to serious misalignment of the front and rear piping or the flanges of the blending.

Before the initial start of work and after shutdown and maintenance, the piping system should be flushed first and then the regulating valve should be installed, or a transition filter should be installed in front of the valve. The butterfly valve should be installed according to the arrow of the flow direction on the valve body, in an environment without severe corrosive gases.