Disassembly And Cleaning Of Electric Sanitary Ball Valve
Publish Time: Author: Site Editor Visit: 8
The disassembly and cleaning of Sanitary Ball Valve are as follows:
1. When reassembling the ball valve body, the bolts must be tightened symmetrically, step by step, and evenly.
2. The ball valve can only be disassembled and disassembled after the pressure before and after the ball valve is removed.
3. The disassembled individual parts can be cleaned by immersion. When cleaning, clean the grease, dirt, glue accumulation, dust, etc. adhering to the wall.
4. The cleaning agent should be compatible with the rubber parts, plastic parts, metal parts and working media (such as gas) in the ball valve. When the working medium is gas, gasoline (GB484-89) can be used to clean metal parts. Non-metallic parts can be cleaned with pure water or alcohol.
