How To Choose And Use Sanitary Pipe Fittings

Sanitary pipe fittings refer to sanitary pipe fittings used in pharmaceutical, food and other industries, which have high requirements for sanitary levels. So how to choose and use sanitary pipe fittings?

When purchasing products, you should not choose because of cheap or expensive prices, but should inspect multiple companies so that you can choose the right products. Sanitary pipe fittings are parts used in systems connected to pipelines. The required parameters are very standard and are a system-matching system. A complete flexible joint should include four parts: nuts, flat joints, cloud heads, and gaskets.

When assembling sanitary flexible joint pipe fittings, the first thing we need to do is to place the flat joint in the nut, then install the gasket in the groove of the cloud head, and finally screw the cloud head into the nut. In this way, a complete set of flexible joint pipe fittings is assembled. After the assembly is completed, it is necessary to use welding to connect to the pipes of the pipeline system. When welding, the operator needs to have excellent skills to avoid holes or welds during welding, which will cause inconvenience to the subsequent work.

If the sanitary pipe fittings have surface defects such as scratches, pitting, over-pickling, etc., the hardness of the raw material of the sanitary pipe fittings is too low, and it is not easy to polish it. During deep drawing, the surface is prone to orange peel phenomenon, which affects the BQ property and causes the sanitary pipe fittings to fail to operate normally. Therefore, the BQ property of high hardness should be relatively good.

When we purchase and use Sanitary Valve, we can purchase our sanitary pipe fittings according to the above purchase method.