How To Correctly Install A Sanitary Diaphragm Valve? - Installation Steps
Publish Time: Author: Site Editor Visit: 37
Determine the flow direction: Ensure that the Sanitary Diaphragm Valve is installed in the correct direction according to the flow direction mark on the valve (usually marked as "F").
Connect the valve
When connecting the pneumatic sanitary diaphragm valve, pay attention to aligning the pipe to ensure that the connection is firm and the seal is good.
If welding is required on the valve body, the actuator must be disassembled first.
Fix and check
Fix the valve correctly to avoid damage caused by over-tightening.
After installation, perform sealing and operation tests to ensure that the valve can operate normally and meet hygiene standards.
