The Stainless Steel Manual Angle Seat Valve Can Be Opened And Closed Manually By The Handle

Angle Seat Valve is a valve widely used in various industrial fluid control occasions. With its design and excellent performance, it has become a key control device in many industries. Its design structure is compact. It adopts a right-angle design and can be easily installed in various pipeline systems. The valve body is made of high-quality stainless steel material, which has the characteristics of high strength, corrosion resistance and wear resistance, and can meet the long-term use requirements in various harsh environments. Secondly, it has excellent fluid control performance. It adopts a spherical valve disc design, which has the advantages of rapid opening and closing, small flow resistance and good sealing performance. The valve can achieve precise control of the fluid and is suitable for various fluid media, such as gas, liquid, slurry, etc.

In addition, it also has a manual operation function. It can be manually opened and closed by the handle, which is simple and flexible to operate and suitable for various occasions. At the same time, the valve is also equipped with a safety protection device, which can automatically cut off the fluid flow when the valve is abnormal, effectively avoiding the occurrence of safety accidents. In terms of installation, it can choose different connection methods according to different pipeline systems and fluid media, such as threaded connection, flange connection, etc. The installation position of the valve can also be selected according to actual needs, and can be installed horizontally or vertically. It is also very easy to maintain. Due to its simple and compact structure, the valve can be easily disassembled and repaired when it fails. At the same time, the use of stainless steel materials also makes the valve have a long service life, reducing the frequency of replacement and maintenance costs.

Basic steps for using stainless steel manual angle seat valves:

1. Preparation

- Make sure the valve is in the closed state.

- Check whether the valve and pipeline connection parts are leaking or damaged.

- Make sure the valve operating lever is in the normal position and can be manually operated.

2. Open the valve

- Turn the valve operating lever counterclockwise until the valve opens.

- Make sure that the medium can flow smoothly through the pipeline after the valve is opened.

3. Adjust the flow

- According to needs, the valve opening can be appropriately adjusted to control the medium flow.

- By rotating the valve operating lever, the flow can be adjusted.

4. Close the valve

- Turn the valve operating lever clockwise until the valve is closed.

- Make sure that the medium stops flowing after the valve is closed and the pipeline is in a closed state.

5. Check for leaks

-After closing the valve, check whether there is any leak in the connection between the valve and the pipeline.

-If any leak is found, it needs to be handled in time to ensure the sealing performance of the valve.

6. Maintenance

-Check and maintain the valve regularly to keep the valve in normal operation.

-If the valve is found to be damaged or faulty, repair or replace parts in time.

7. Safety precautions

-When operating the valve, pay attention to safety to avoid accidents.

-Avoid excessive force or excessive rotation of the valve to avoid damage to the valve or pipeline.

8. Clean the valve

-Clean the surface and interior of the valve regularly to ensure the hygiene and normal operation of the valve.

-Avoid debris or dirt from entering the valve, which will affect the service life and performance of the valve.