Sanitary Stainless Steel Self-priming Pump With Clamp Ends

The WLRP pump is a liquid-ring pump which is specially designed for pumping liquids containing air or gas. The pump is used in food, chemical, pharmaceutical and similar industries. The pump can be used for CIP-return. Mechanical single seal with stationary seal ring of acid-resistant steel AISI316L with sealing surface in carbon and rotating seal rings of siliconcarbide. The pump has a stainless steel shroud for protection of the motor, and the complete unit is supported on four adjustable stainless steel legs.

All product wetted parts, pump casing, casing cover and impeller are made of acid-resistant steel AISI316L .Motor shroud is made of stainless steel AISI304. Seals are made of EPDM rubber.
Product wetted steel parts: Acid-resistant steel AISI 316L.
Other Parts
Parts: Stainless steel AISI304
Outside Surface: Semi bright
Inside Surface: Bright
Product wetted seals: EPDM rubber

Motors

1.These motors are built to comply with current International Standards

International Electro-technical Commission-IEC34 and IEC72
British Standard-Bs5000 and BS4999
Australian Standard-AS1359-2
German Standard-DIN42673
EU directives to fulfill European "CE" marking

2. These motors are built to comply with current National Standards

GB755-87, GB10069-88, Q/JBQS28-2000

3. Mechanical Design: Terminal boxes

4. Electrical Design

Minimum Noise and Vibration levels
Maximum Degrees of Protection
All motors are protected to IP55 as a minimum. Higher levels of protection are available on request.
Service and Operating Conditions
Motors are designed to be insensitive to wide supply voltage fluctuations.
Class F insulation offer reliability and security